undefined
undefined
+
  • undefined
  • undefined

Medical protective mask

The product is composed of a mask body, a mask belt, a nose clip, a sealing strip and an adjusting buckle. The outer and inner layers of the mask body are polypropylene spunbonded non-woven fabrics; The middle layer is hot-air cotton and polypropylene melt blown non-woven fabric; The mask belt is made of polyester and spandex; The nose clip is made of polypropylene wrapped galvanized iron wire material; The sealing strip is made of polyurethane material; The ear hanging adjustment buckle is made of polypropylene material, and the head wearing adjustment buckle is made of silicone material. The product is provided in sterile or non sterile form for one-time use.

Key words:

medical mask nose clip

Details

Instruction manual of medical protective mask

[Product name] Medical protective mask

[Model and specification] Folding headwear type and folding ear hook type.

[Main performance of the product]

1. Filtering efficiency: when the gas flow is 85L/min, the filtering efficiency of the mask for non oily particles should be ≥ 95%.

2. Air flow resistance: when the gas flow is 85L/min, the suction resistance of the mask shall not exceed 343.2Pa (35mmH2O).

3. Tightness: The mask design shall provide good tightness, and the overall fitness factor of the mask shall not be less than 100.

4. It shall be sterile.

5. The residual amount of ethylene oxide shall not exceed 10 μ g/g。

[Structure] The product is composed of a mask body, a mask belt, a nose clip, a sealing strip and an adjusting buckle. The outer and inner layers of the mask body are polypropylene spunbonded non-woven fabrics; The middle layer is hot-air cotton and polypropylene melt blown non-woven fabric; The mask belt is made of polyester and spandex; The nose clip is made of polypropylene wrapped galvanized iron wire material; The sealing strip is made of polyurethane material; The ear hanging adjustment buckle is made of polypropylene material, and the head wearing adjustment buckle is made of silicone material. The product is provided in sterile or non sterile form for one-time use.

[Scope of application] It is used to filter particles in the air, block droplets, blood, body fluids, secretions, etc. in the medical work environment.

[Contraindication] It is forbidden for those who are allergic to the materials used in the product.

[Usage]

Folding headwear method:

1. Hold the protective mask with one hand, and the side with nose clip shall face outward.

2. Cover the nose, mouth and chin with the protective mask, and the nose clip should be close to the face.

3. Use the other hand to pull the lower tether over the top of your head, place it under your ears behind your neck, and then pull the upper tether to the middle of your head.

4. Place the fingertips of both hands on the nose clip, start from the middle position, press the nose clip inwards with your fingers, move and press it to both sides respectively, and shape the nose clip according to the shape of the nose bridge.

5. Suitability check: cover the protective mask with both hands and exhale vigorously. If there is air leakage near the nose clip, readjust the nose clip; If the air leakage is located around, the adjustment button on the mask can be used for adjustment.

Folding ear hook wearing method:

1. Hold the protective mask with one hand, and the side with nose clip shall face outward.

2. Cover the nose, mouth and chin with the protective mask. The nose clip should be close to the face and the mask belt should be hung on the ears.

3. Place the fingertips of both hands on the nose clip, start from the middle position, press the nose clip inwards with your fingers, move and press it to both sides respectively, and shape the nose clip according to the shape of the nose bridge.

4. Suitability check: cover the protective mask with both hands and exhale vigorously. If there is air leakage near the nose clip, readjust the nose clip; If the air leakage is located around, you can use the adjusting buckle on one side of the mask to hook the mask belt on the other side for adjustment.

[Precautions]

1. Please do not use the product if its package is damaged, and do not use it if it is beyond the validity period.

2. This product is disposable, and it is strictly prohibited to reuse. After use, it shall be handled according to the requirements of the hospital and environmental protection department.

3. The wearing time of a single product should not exceed 4 hours. If the respiratory resistance is significantly enhanced (when breathing is difficult), the mask is damaged and contaminated, it should be replaced in time.

4. The product shall be used as soon as possible after opening.

5. When removing the mask, do not touch the front of the mask (the contaminated surface). Use your hands to only hold the mask belt and throw it into the medical waste container.

[Explanation of graphics, symbols, abbreviations, etc. used in labels]

Keep away from sunshine and rain. If the package is damaged, do not use it. Do not use it again. Sterilize it with ethylene oxide. Refer to the instructions for use

[Storage] Store in a dry, ventilated and non corrosive gas environment, away from ignition sources and inflammables.

[Transportation] It shall be protected from heavy pressure, sharp tools, direct sunlight, rain and snow.

[Production date, production batch number, expiration date] See the outer package.

[Sterilization method] The product is sterilized by ethylene oxide.

[Validity] The product is valid for 2 years (obtained through accelerated aging test).

[Medical Device Production License No.]

[Medical Device Registration Certificate No.]

[Product Technical Requirements No.]

[Executive Standard No.] GB 19083-2010

[Registrant/manufacturer/after-sales service unit] Zibo Chuangqi Medical Supplies Co., Ltd

[Domicile] The first and second floors of Zone A, Plant 16, Instrument Industrial Park, No. 9009, Qinglongshan Road, High tech Zone, Zibo City, Shandong Province;

No. 777, Changzheng Road, High tech Zone, Zibo City, Shandong Province.

[Production address] The first and second floors of Zone A, Plant 16, Instrument Industrial Park, No. 9009, Qinglongshan Road, High tech Zone, Zibo City, Shandong Province.

[Tel.] 400-677-0533

[Preparation/Revision Date] Prepared in January 2022.

Related Products

Message

Our staff will contact you ASAP. If you need other services, please call the service hotline:+86-400-677-0533