undefined
undefined
+
  • undefined
  • undefined

Medical disposable protective clothing

The product is made of polypropylene non-woven fabric material covered with polyethylene film. Type LTS-A is a one-piece structure consisting of hooded jacket and trousers; Type LTS-B consists of protective clothing and shoe covers, and the protective clothing is a one-piece structure; Type LTS-C is a one-piece structure, consisting of hoodie, pants and shoe covers. The cuffs, ankles, caps and waists of the products are elastically closed; The product is provided in sterile or non sterile form for one-time use.

Key words:

medical protective clothing

Details

Instructions for disposable medical protective clothing

[Product name] Medical disposable protective clothing

[Model and Specification] Model: LTS-A, LTS-B, LTS-C; Specifications: 100, 110, 120, 130, 140, 150, 160, 165, 170, 175, 180, 185, 190, 195, 200, 205, 210.

[Main performance of the product]

1. Breaking strength: The breaking strength of materials at key parts of protective clothing in dry and wet state shall not be less than 45N.

2. Elongation at break: the dry and wet elongation at break of materials at key parts of protective clothing shall not be less than 15%.

3. Filtering efficiency: the filtering efficiency of non oily particles at key parts and joints of protective clothing shall not be less than 70%.

4. Antistatic property: the electrification of protective clothing shall not be greater than 0.6 μ C/piece.

5. It shall be sterile.

6. The residual amount of ethylene oxide shall not exceed 10 μ g/g。

[Structure] The product is made of polypropylene non-woven fabric material covered with polyethylene film. Type LTS-A is a one-piece structure consisting of hooded jacket and trousers; Type LTS-B consists of protective clothing and shoe covers, and the protective clothing is a one-piece structure; Type LTS-C is a one-piece structure, consisting of hoodie, pants and shoe covers. The cuffs, ankles, caps and waists of the products are elastically closed; The product is provided in sterile or non sterile form for one-time use.

[Scope of application] It is used for blocking and protecting the blood, body fluids, secretions, etc. of patients with potential infectivity that clinical medical personnel are exposed to during work.

[Contraindication] It is forbidden for those who are allergic to the materials used in the product.

[Usage]

1. Unpack the protective clothing and check whether it is in good condition.

2. Wearing protective clothing should follow the sequence of putting on clothes first, then putting on coat, then putting on hat, and finally pulling up the zipper.

3. When taking off the protective clothing, first pull the zipper to the end. Lift the cap upward to make it off the head, take off the sleeves, and remove the side roll from the top to the bottom, with the pollution facing inward until it is completely removed and put it into the medical waste bag.

[Precautions]

1. Please refer to the instructions before use;

2. Disposable use and destruction after use;

3. If the package is damaged or expired, it is prohibited to use;

4. The product shall be used as soon as possible after opening;

5. Dispose according to the requirements of medical waste management after use;

6. It is recommended that the service time should not exceed 8h, and any leakage or damage should be replaced in time;

7. This product is not flame retardant;

[Explanation of graphics, symbols, abbreviations, etc. used in labels]

Keep away from sunshine and rain. If the package is damaged, do not use it. Do not use it again. Sterilize it with ethylene oxide. Refer to the instructions for use

[Storage] Store in a dry, ventilated and non corrosive gas environment, away from ignition sources and inflammables.

[Transportation] It shall be protected from heavy pressure, sharp tools, direct sunlight, rain and snow.

[Production date, production batch number, expiration date] See the outer package.

[Sterilization method] The product is sterilized by ethylene oxide.

[Validity] The product is valid for 2 years (obtained through accelerated aging test).

[Medical Device Production License No.]

[Medical Device Registration Certificate No.]

[Product Technical Requirements No.]

[Executive Standard No.] GB 19082-2009

[Registrant/manufacturer/after-sales service unit] Zibo Chuangqi Medical Supplies Co., Ltd

[Domicile] The first and second floors of Zone A, Plant 16, Instrument Industrial Park, No. 9009, Qinglongshan Road, High tech Zone, Zibo City, Shandong Province;

No. 777, Changzheng Road, High tech Zone, Zibo City, Shandong Province.

[Production address] The first and second floors of Zone A, Plant 16, Instrument Industrial Park, No. 9009, Qinglongshan Road, High tech Zone, Zibo City.

[Tel.] 400-677-0533

[Preparation/Revision Date] Prepared in March 2022.

Related Products

Message

Our staff will contact you ASAP. If you need other services, please call the service hotline:+86-400-677-0533